fibreglass boat repairs gold coast

Fibreglass Repair

Fibreglass boat repair specialists. No job too big or small.

boat painting gold coast

Boat Painting / Varnishing

Professional painters ready to repair and paint your vessel.

boat detailing and maintenance gold coast

Boat Detailing

Quality Boat Detailing Services, regular maintenance or one off.

boat antifouling gold coast propspeed

Antifouling and Propspeed

Antifoul Protection and Propspeed specialists.

Mechanical Repairs / Service

All Mechanical repairs, vessels on all sizes.

Posts Tagged ‘gold coast’

Trailer Boat repairs are a major portion of our operation and something we take pride in! We even recently opened a new premises which is being kitted out to repair trailer boats, jet ski’s and other personal water craft. Located in Coomera Marine Precinct on the Gold Coast, QLD Australia.

This Trailer boat presented with a flexing hull, some stress fracturing occurring around the load points when the vessel was on its trailer and slight flexing in the hull and a soft flooring. The Plan here was to remove the floor, re-enforce the Hull and repair the stress fracturing with additional advanced GRP laid down then improve on the design of the hull and floor support with some lateral marine ply bearers tailored to the hull shape and contour and bonded in with advanced Acme Bond. This would then be laid up with more Advanced Fibre Glass and resin to produce a very sturdy hull structure before being flow coated for water proofing and then re installing the floor and re-glassing the floor in with some minor repairs to the floor edges. Just one of those jobs our team thoroughly enjoy performing, improving on the manufacturers design and handing a boat back that will not only withstand tougher conditions but maneuver and handle better in the water! View the images below of the progress.

UPDATE – Glassing over the lateral stringers is completed and the area flow coated to finish it off. The floor is then bonded back in place and next the area will be prepared and new non skid will be applied. More pics to come soon.

65′ foot Aluminium Twin Hull Super Powered Catamaran Repairs, Respray/repaint and Antifoul.

The Nicecotedazur boat show team has been busy with this project at the Gold Coast City Marina in Coomera on the Gold Coast. Underway is a complete exterior respray/repaint and anti-foul all performed to a budget. Major repairs are also being undertaken to the exterior and some “redesign” of the paint scheme along with a new area of non skid decking to increase the pleasure and useability of the vessel. The completed cat will include a complete respray with JOTUN Marine 2 Pac Urethane white and black. The non skid is to be altex/resene non skid coating.The hull will be coated with JOTUN advanced antifoul products after a thorough clean. Along side CleanABoat’s team there has also been a major interior refit underway to reface this vessel to be a majestic 21st century vessel.

Expected completion to be mid December this year (2010) ready for Christmas when we are sure it will have plenty of use! We might even join the owner for a brewski or three! Check out the gallery below and we will continue to update as we go!

click here to view cleanaboat’s YouTube channel.

20′ Bayliner 205 Trailer Boat Repairs

July 25, 2010 11:48 pm - Posted by admin in Paintwork, Trailer Boat Repairs

1997 Model 20′ Bayliner 205, Trailer Boat with some surface cracking, aged/damaged paintwork and some more serious fractures on the port side. The boat had previously been epoxy primed and anti-foul painted, a feature the new owner would prefer not to have on a trailer boat. There was also some mechanical issues resulting from when a previous mechanic failed to secure the U-Joint/Shaft Bellows correctly causing water to enter the area damaging the gimbal bearing & entering the Mercruiser Alpha leg causing more damage. Finally a full set of new gauges to be installed and a full engine service. CleanaBoat is doing the works on this boat! From a  gunnel strip down respray with a bunch of fibre glass repairs. 2 Pac respraying the blue stripe area & completely removing the previous antifoul repairing damage from years of use and restoring the hull to factory condition & even better than factory shine. This is a beautiful day boat and will certainly be a stunner by the time we are finished with her!

Currently still in progress, we will update with more pictures as we progress through the job! No Boat is to big or too small!

UPDATE! The Alpha leg repaired & all new bellows is back on the boat, the engine has been started and all is well mechanically! We are in the final preparation stages for spraying the Blue top section of the hull! Stay tuned for updates soon!

UPDATE! Blue has been sprayed, see pics! Along with the boat put on hard stand and the hull prep completed! remaining antifoul has been removed and a bunch of repairs completed, it’s now in hi build prepped and masked about to be sprayed! She is almost finished and looking like a brand new boat!

UPDATE! Hull is painted!! With Sterling Linear Epoxy Polyurethane 2 Pac white paint! And she is looking spectacular! You would be pressed to find a brand new baylinner looking as good as this old girl. Check out the lastest images below in the gallery!

UPDATE! The boat has its pin stripe added by stripe ‘n’ FX on the Gold Coast and the finishing touches have been completed to the engine, and the instrument cluster! See the new pics of the finishing touches and the boat back on its trailer!

This job was completed at the Gold Coast Marine Centre in Coomera where we regularly perform this type of work.

After a Major Exhaust Segment Failed during a long trip this Vitech sustained major soot damage throughout the vessel, requiring the entire Saloon floor area to be removed, carpet sections replaced and a major cleanup and exhaust system repair to take place. Nice cotedazur boat show was up to the task, promptly lifting the vessel at the Gold Coast Marine Center we got to work, the boat was stripped of all damaged interiors, the saloon floor removed allowing access to the BLACK sooted engine room and after lots of protective plastic was laid we got to work cleaning the mess. The environment is always considered with Nicecotedazur boat show & a pump truck was brought in to remove the dirty cleaning water and debris from the bilge, images below.

Testimonial – 16.5m Catamaran Repairs | David

April 20, 2010 12:20 am - Posted by Jeff in Testimonials

I am extremely happy with the repair and finishing work that you performed. It was a pleasure to have someone take the trouble to ensure that the job was done right. In particular the work done to repair the staunchion which required matching the non slip surface, was excellent. Thank you again. – David

See the full  job in our Vessel Repairs Blog Category! click here


16.5m Sailing Catamaran Repairs

April 19, 2010 12:24 am - Posted by Jeff in Marine Vessel Repairs

Nicecotedazur boat show Performed Repairs to this 16.5m Sailing Catamaran at the Gold Coast City Marina. Port Side Bow damage, Superficial crack repairs inside saloon, one port side railing base crack repair & fiber glass repair, table top heat damage & cosmetic window frame repairs. The Boat is painted in 2Pac Polyurethane, our team performed the repairs flawlessly and on time! Even the nonskid was colour matched and re contoured around the railing base repair. And the owner swears the table looks better than new! Take a look through the gallery below.

A Word from the Owner – David

I am extremely happy with the repair and finishing work that you performed. It was a pleasure to have someone take the trouble to ensure that the job was done right….. click to read the rest.